BGP-03 – Grommet Setting Press

Description

Grommet Setting Press

Are you tired of trying to set your own grommets by hand? Are you going deaf from the noise? Help is here with our wonderful new Grommet Setting Press! Use the Grommet Hole Cutting Die (sold separately) to cut perfectly sized holes. Then, easily switch the Hole Cutting Die for the Grommet Setting Die (sold separately). Follow the instructions below where we explain how to set a Grommet. Give the handle of the Press one good push down and your Grommet is set. No fuss, no muss, no noise! You can set 36 grommets in less than 10 minutes.

How to Use:

Using the Grommet Setting Press is easy. First, measure out and mark where you would like to set your Grommets, on your garment. With your Grommet Setting Press, first use the appropriately sized Grommet Hole Cutting Die to cut the holes where you have made your marks. Then, change to your Grommet Setting Die Size either #00 or #2. Place the post half of the grommet face down on the bottom part of the die. Place your garment, face down, over the spindle, so that it is lying flat against the flat part of the grommet. The post should now be poking all the way through the hole in your garment. Now place the collar, right side up, over the post. The post should now be sticking up through the collar. While holding the garment with one hand, simply press the handle of the Grommet Press downward to set the Grommet. Voila! you now have a functional Grommet!